CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage. Trade only with money you can afford to lose.
Open FxPro Account →
Measured

FxPro Raw+ Conditions, Pakistan — the Spec Sets the Unit

The hard numbers behind a Raw+ account, read straight from FxPro’s own MetaTrader 5 feed: contract specs, order rules and the 2,122 tradable instruments — last read 2026-08-14.

Open FxPro Account →

Min deposit $100  ·  Up to 1:200  ·  Rating 4.6/5

Contract specifications are where a metal stops behaving like a currency pair, and this page reads the difference off the live server rather than assuming it. On the majors a standard lot is 100,000 units and the quote runs to five decimals; on XAU/USD a standard lot is 100 troy ounces and the quote runs to two. Those two fields — contract size and decimals — set the unit that every other figure on the site is denominated in, which is why an identical tick-value column can describe two completely different quantities of risk. The order rules themselves are shared: 0.01 to 500 lots in 0.01-lot steps, and no minimum stop distance. Their meaning is not — 0.01 lot is 1,000 currency units on a pair and a single ounce on gold, and slippage counted in points is a fraction of a pip on a pair and cents an ounce on the metal. Read every row below in the unit of the instrument it describes.

Contract specifications (measured)

InstrumentMin lotMax lotLot stepContract sizeTick value (USD)Digits
EUR/USD0.015000.01100,000$1.005
GBP/USD0.015000.01100,000$1.005
AUD/USD0.015000.01100,000$1.005
USD/CAD0.015000.01100,000$0.725
USD/JPY0.015000.01100,000$0.633
XAU/USD (Gold)0.015000.01100$1.002

Read live from FxPro’s MT5 Raw+ account. ‘Tick value’ is the cash change per minimum price increment, per standard lot, in USD — what one point is worth to your P&L. Last read 2026-08-14.

Order rules and account risk

  • Minimum order 0.01 lot and maximum 500 lots, in 0.01-lot steps (0.01 lot = 1,000 units on an FX major).
  • No minimum stop or limit distance (stops level 0) — you can place a stop-loss or take-profit right next to price, which suits scalping and expert advisors.
  • Margin call at 10% and stop-out at 0% margin level, as measured on the Raw+ account — confirm the live levels in your own terminal before risking capital.
  • Contract size 100,000 units per lot on FX majors and 100 oz per lot on gold.
Open FxPro Account →

Execution speed and slippage (measured)

InstrumentOrder sizeAvg fillMax fillAvg slippage (pts)At price / better / worseFails
EUR/USD0.0189 ms94 ms0.03 / 0 / 00
EUR/USD0.178 ms78 ms0.03 / 0 / 00
EUR/USD1.089 ms94 ms0.03 / 0 / 00
GBP/USD0.0183 ms94 ms0.03 / 0 / 00
GBP/USD0.183 ms93 ms0.03 / 0 / 00
GBP/USD1.088 ms94 ms1.01 / 0 / 20
XAU/USD (Gold)0.0183 ms93 ms5.6671 / 0 / 20
XAU/USD (Gold)0.1141 ms250 ms-4.3332 / 1 / 00
XAU/USD (Gold)1.083 ms94 ms9.6671 / 0 / 20

Measured by placing real market orders on the Raw+ account and timing each fill; slippage is the price difference (in points) between the click and the fill, and ‘at price / better / worse’ counts how those fills landed. Small sample (a few round-trips per size) — indicative, last read 2026-06-24.

Instrument universe (measured)

FxPro’s live MT5 server carries 2,122 tradable instruments — the real count, not a rounded marketing figure. The major tradable asset classes:

Asset classInstruments
Stocks1,856
Forex75
Futures57
ETFs46
Cryptos36
Spot22
Metals12

Counted directly on the trading server. Availability of a specific instrument can vary by account and region.

The specification is the unit, and the unit is the risk

Every other cost page on this site depends on two numbers from the table above: contract size and quote decimals. Together they decide what a point is worth, how much capital a lot commits and how far a stop in points really sits from price. For a currency major that pair of numbers is 100,000 and five; for gold it is 100 and two, and nothing else about the account changes.

That is why an order rule can be shared while its meaning is not. The 0.01-lot minimum is one rule on both, but on a pair it buys 1,000 units of currency and on gold it buys a single ounce of metal. The zero-point stops level is one rule on both, and on gold it means a stop can sit one cent an ounce away from the price.

Execution figures in the metal's own points

Fill speed is measured in milliseconds and reads the same on any instrument, but slippage is measured in points and does not. A few points on a five-decimal pair is a fraction of a pip; the same few points on gold is a few cents an ounce, which is a few dollars on a standard lot. The execution table above lists each order size separately, so compare rows within an instrument rather than across the table.

The same caution applies to the instrument universe. A count of 2,116 tradable instruments says nothing about how any one of them is specified — metals and currency pairs arrive with their own contract size and step. Before a first order on a new instrument, read its specification the way this page reads gold's: contract size first, decimals second, everything else after. The cost consequences are worked through on our spreads and costs page.

One lot, two units

Line to checkEUR/USD (currency major)XAU/USD (gold)
What one standard lot is100,000 units of the base currency100 troy ounces
Smallest ticket (0.01 lot)1,000 units1 troy ounce
Quote decimals52
One point on the quote0.00001 of the price$0.01 an ounce
What the tables call one pip0.0001 of the price, $10 per lot0.01 an ounce, a dollar per lot
Quoting scheduleContinuous through the trading weekWeekday schedule with a short daily break
Raw+ commission$3.50 per lot per side$3.50 per lot per side

Read from the measured contract specifications above. The commission is identical on both; the quantity it is charged on is not.

Frequently asked questions

What is a standard lot on gold at FxPro?
100 troy ounces, against 100,000 units on a currency major. The measured contract specifications table above lists the contract size for each instrument, and it is the number every other calculation depends on.
What is the minimum and maximum trade size at FxPro?
On the measured Raw+ account the minimum order is 0.01 lot and the maximum is 500 lots, in 0.01-lot steps. One standard lot is 100,000 units on an FX major and 100 troy ounces on gold, so the same 0.01 lot is 1,000 units on a pair and a single ounce on the metal.
Why does the tick value column show the same figure for gold and EUR/USD?
Because a tick is a different distance on each. On a five-decimal pair it is the smallest step of the quote across 100,000 units; on gold it is one cent across 100 ounces. The two land on the same cash value per standard lot — an arithmetic coincidence of the contract sizes, not a sign that the two instruments move alike.
Does FxPro have a minimum stop-loss distance?
No. The measured stops level is 0, so you can place a stop-loss or take-profit right next to the price. On a metal, keep in mind what the distance means: a hundred points is a dollar an ounce, or a hundred dollars on a standard lot.
How fast does FxPro execute orders?
In our measurements market orders on EUR/USD filled in well under a tenth of a second, with near-zero slippage and no rejects across the tested sizes. The execution table above lists each instrument separately, with slippage quoted in that instrument's own points.
How many instruments can I trade at FxPro, and where do metals sit?
FxPro's live MT5 server carries 2,116 tradable instruments across forex, shares, indices, metals, energies and ETFs. The asset-class table above shows how that count splits, with metals as their own small group under their own contract sizes.
Do metals trade around the clock like currency pairs?
Gold is quoted on a weekday schedule with a short daily break rather than continuously, so the instrument's own specification — not the habit carried over from currency pairs — is what says when an order can be placed.
Where do I check a metal's specification before trading it?
In the instrument's contract specification inside the platform, which lists contract size, minimum step, tick value and swap. The tables above are the same information read directly from the live trading server.

Related FxPro pages